Shop
Showing 33–48 of 132 results
-
Coating Premix Tank
The premix tank will be located outside of the robot’s enclosure to provide normal operation, without interruption, during the operator’s loading of the premix tank. When required, the operator selects the desired coating tank, initiates and stops pumping the premix solution to the coating tank. This allows the operator to maintain control of the mixture level in the coating tanks.
-
Coating Tank
The Coating Tank is a vessel for dipping clusters in coating. Vessel, mixer, heating system, and controls are specifically designed for the lost foam process. The system provides more accurate control of the coating process for repeatability.
-
Donovan High Capacity Mold Handler
Donovan™ Mold Handling Equipment is designed to handle large molds or flasks. This Gantry Style Rollover is designed to handle over 30,000lbs (13,500 kg).
-
Donovan™ Picture Frame Mold Handlers
Donovan™ Picture Frame Rollovers are designed to handle large, narrow flaskless molds. These Hydraulic-powered mold rollovers are equipped with replaceable tip mold clamping pads and built-in hydraulics that can run continuously without overheating. The clamping pads are designed to clamp the molds along the long end of the mold to create the greatest clamping force without crushing the mold.
-
Donovan™ Standard Flask Mold Handlers
Donovan™ Standard Flask Rollovers are crane hung and designed to lift, move, rollover and close a specific size flask.
-
Donovan™ Telescoping Mold Handlers
Donovan™ Telescoping Rollovers are designed to handle a specific size range and weight capacity of flasks or nobake molds. These rollovers have all the same features as the F-Series standard rollovers, plus a telescoping leg to allow for the handling of a range of Flask or Flaskless molds.
-
Dust Collection
Vulcan will provide estimated air volume rates at required pick-up points to assist the Customer in designing the dust collection system. No dust collection equipment is included with this quotation. Any final designs and calculations will be the sole responsibility of the contractor providing the dust extraction equipment. Hoods and / or pick-up flanges will be provided by Vulcan at the flask fill, screener / classifier and bucket elevator.
-
Flask Fill
The system will be designed using the most advanced technology currently available for controlling sand fill at the compaction station. The operation of this equipment will be integrated with and controlled by the compaction system’s control.
-
Flow Coating System
This system is designed for special coating applications in the Lost Foam Process. This unit can be manually operated or used in conjunction with a robot to coat clusters of foam parts, which cannot be submerged or partially submerged.
-
Fluidized Sand Bed
The Fluidized Sand Bed is designed to fit your investment casting system and facility needs.
-
Foam Molding Machine MPH 80/35-A
Foam Molding Machine MPH 80/35-A is used for producing foam replicas from pre-expanded polystyrene beads.
-
Foam Molding Machine MPH 80/60
Foam Molding Machine MPH 80/60 is used for producing foam replicas from pre-expanded polystyrene beads. This equipment is specifically designed for the lost foam process.
-
Foam Molding Machine MPH100/100
Foam Molding Machine MPH 100/100 is used for producing foam replicas from pre-expanded polystyrene beads. This equipment is specifically designed for the lost foam process.
-
Foam Molding Machine MPH120/120
Foam Molding Machine MPH 120/120 is used for producing foam replicas from pre-expanded polystyrene beads. This equipment is specifically designed for the lost foam process.
-
Foam Molding Machine MPV 100/100
Foam Molding Machine MPV 100/100 is used for producing foam replicas from pre-expanded polystyrene beads. This equipment is specifically designed for the lost foam process.
-
Foam Molding Machine MPV 80/60
Foam Molding Machine MPV 80/60 is used for producing foam replicas from pre-expanded polystyrene beads. This equipment is specifically designed for the lost foam process.