Grinders & Cut-Offs
Showing 1–16 of 40 results
-
Protected: Fox® SuperAbrasive Stand Grinder – SA23
The Fox® SA23 Superabrasive Stand Grinder provides extraordinary robustness, unparalleled performance and longevity. Used for the grinding of Grey or Ductile Iron Castings, it can be used in manual operations, semiautomatic, or robotic applications.
-
Fox® Remelt Ingot Processing System
The Fox® Remelt Ingot Processing System is an automated start-to-finish ingot processing system that can be tailored to accommodate many different configurations of equipment stations.
-
Mid-West Machine™ Slab Manipulator
The Mid-West Machine™ Slab Manipulator consists of a base frame, hydraulic power unit with valve manifold, two single modules, and one double module and a festoon for power and control circuits. The unit allows the operator to manipulate and clamp slabs from the cab. The car may be loaded with a fork truck or crane. The unit allows manipulation and clamping so all four sides can be secured and ground efficiently.
-
Fox® 1090 Swing Frame Grinder
1090 Swing Frame Grinders offer excellent visibility and outstanding maneuverability. With the wheel turned 90 degrees from the typical swing grinder, the operator has much better visibility while grinding. A superior Hanger System allows for a perfectly balanced machine. It can be easily rotated for grinding on either side of a casting.
-
Fox® Round Parts Grinder
Fox® Round Parts Grinders are available as Automatic or Semi-Automatic grinding of the outside diameter of round castings.
-
Mid-West Machine™ Load/Unload Tables
The Mid-West Machine™ Load/Unload Tables are designed to handle rounds or square billets. This equipment will index additional pieces until the load table is full. When the operator is ready for a new piece to grind the car is moved to the car load position and the walking beam places the material on the car.
-
Mid-West Machine™ Rounds Rotator Car
The Mid-West Machine™ Rounds Rotator car is designed to handle rounds up to 45 in (1,143mm) diameter, in lengths to 150 in (3,800mm) and weights up to 50,000 lbs (22,650 kgs). The Mid-West Machine rounds rotator car is designed to rotate round, straight product during grinding for “Spiral Grinding” or hold it stationary for longitudinal or spot grinding.
-
Mid-West Machine™ 3000 Ingot End Grinder
This specially designed machine can grind billets, blooms, slabs, squares, round cornered squares, octagons or rounds and are readily adapted to automated material handling equipment.
State of the art solid state controls, automatic travel systems, anti-penciling systems, constant horsepower or constant force and ease of operation with a minimum of down time make Mid-West Machine ™ the logical choice for your conditioning requirements.
-
Fox® Air Float Cut-Off with Horizontal Traveling Axis
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
The Air Float Cut-Off with Horizontal Traveling Axis is a specially designed cut-off system that provides control of the saw with joysticks from a Control Panel located outside of the machine enclosure.
-
Mid-West Machine™ 3000 Stationary Grinder
Stationary systems are ideally suited to high production within a reasonable, specific size range. These machines are designed to grind billets, blooms, slabs, squares, round cornered squares, octagons or rounds and are readily adapted to automated material handling equipment.
State of the art solid state controls, automatic travel systems, anti-penciling systems, constant horsepower or constant force and ease of operation with a minimum of down time make Mid-West Machine ™ the logical choice for your conditioning requirements. -
Fox® Semi-Automatic Compliant Belt Grinder
Developed from Vulcan’s Robotic Grinding compliant technology, the system provides high metal removal rates by applying the correct grinding force throughout the process. Much faster than traditional rise and fall table grinding technology.
-
Action® Impactor™ 200H
The Action® Impactors™ is designed to remove risers quickly and efficiently. Shock absorbing handles and cushion assembly provide long life and less wear and tear on the operator. Major feature is the ability to dry fire the Impactor™ without damage to the machine, a major advantage over competitive models. One machine can replace several people using sledge hammers.
-
Action® Impactor™ 100H
The Action® Impactors™ is designed to remove risers quickly and efficiently. Shock absorbing handles and cushion assembly provide long life and less wear and tear on the operator. Major feature is the ability to dry fire the Impactor™ without damage to the machine, a major advantage over competitive models. One machine can replace several people using sledge hammers.
-
Action® Impactor™ 65H
The Action® Impactors™ is designed to remove risers quickly and efficiently. Shock absorbing handles and cushion assembly provide long life and less wear and tear on the operator. Major feature is the ability to dry fire the Impactor™ without damage to the machine, a major advantage over competitive models. One machine can replace several people using sledge hammers.
-
Fox® Air Float Cut-Off Machine 6PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.
-
Fox® Air Float Cut-Off Machine 4PMC-AF
The Fox® Air Float Cut-Off machine is ideal for gate and riser removal on small to medium size castings, or castings on runner bars or trees. The system excels at cutting castings produced in small to medium runs, because fixtures are easy to change. The machine also is well suited for cutting off castings that are too heavy for operators to handle, as the air float feature makes moving several hundred pounds almost effortless.