Fox® 6-C Swing Frame Cut-Off Machine

Fox® swing frame cut-off machines remove gates and risers from castings or can separate castings tied together with runner systems. When gates or risers are on flat surfaces, cuts can be made very close to the casting eliminating the need for additional grinding.

The Fox® 6-C Swing Frame Cut-Off Machine is the best combination of horsepower, size and weight. Maximum recommended cut is 6 in (154 mm). These machines are fast and economical means for removing gates and risers from castings. The swing frame design allows a full 90° swing clockwise and 75° swing counterclockwise.

Wheel Size

20 in x 3/16 in x 1 in [610mm x 5mm x 25mm)

Wheel Speed

14,200 SFPM (22 m2 / s)


20 HP (15 kws)


Single-speed Pulley


600 lbs (272 kg)

  • Sealed for life Fox® spindle
  • Shaft is made of high strength alloy steel
  • Threads on shaft are acme threads providing resistance to dirt buildup and they are less prone to damage as compared to standard “V” threads.
  • Fox® exclusive hanger system allowing ease of movement when aligning or cutting
  • Each machine is individually balanced
  • Fox® exclusive belt changing system for use with the two speed drive.
  • Pulley centers are the same for each step of the two speed drive, no belt adjustment is required.
  • Motor is mounted using a cam arrangement; belts can be loosened or tightened in just a few seconds.
  • Electrical Package included

Depressed Center Wheel
Machine is available to accept 20in Depressed Wheels for closer cutting along large surfaces.

Download Swing Frame Cut-Off Material