Mold Preheat Ovens

The Mold Preheat Oven is designed to enclose three parts of the maximum size – 84 in long (2,134 mm). The Conveyor, when programmed to advance 84 in increments every two minutes, will provide six minutes of heating to each cope or drag of the maximum size. Smaller parts may be loaded on the conveyor in higher density.

The Mold Preheat Oven is designed to enclose three parts of the maximum size – 84 in long (2,134 mm). The Conveyor, when programmed to advance 84 in increments every two minutes, will provide six minutes of heating to each cope or drag of the maximum size. Smaller parts may be loaded on the conveyor in higher density.

Length

8-0 in (203-0 mm)

Width

6-0 in (152-0 mm)

Height

84 in (2,134 mm)

Conveyor Height

32 in (813 mm)

Infrared Element

3,000 watts each

  • Oven to straddle existing conveyor
  • Oven heat provided by eleven high intensity infrared elements
  • Heating intensity controlled by SCR controller in panel
  • Heating unit will cutoff if conveyor fails to index within a predetermined period of time