Mold Drying Ovens

One Mold Drying Oven is provided. The oven is designed to enclose three parts of the maximum size 84 in long (21 m). The conveyor, when programmed to advance 84 in increments every 2 minutes will provide six minutes of heating each cope or drag of the maximum size. Smaller parts may be loaded on the conveyor in higher density.

One Mold Drying Oven is provided. The oven is designed to enclose three parts of the maximum size 84 in long (21 m). The conveyor, when programmed to advance 84 in increments every 2 minutes will provide six minutes of heating each cope or drag of the maximum size. Smaller parts may be loaded on the conveyor in higher density.

Length

25-0 in (635-0 mm)

Width

6-0 in (152-0 mm)

Height

84 in (2,134 mm)

Conveyor Height

32 in (813 mm)

Infrared Element

3,000 watts each

  • Oven to straddle existing conveyor
  • Heating intensity controlled by SCR controller in panel
  • Oven heat provided by thirty-two high intensity infrared elements
  • Two IHF #200 blowers supply air to slots adjacent to the IR modules to promote rapid drying
  • Each blower to deliver 8,550 CFM driven by a 7.5 HP (5.5 kW) TEFC drive
  • Heating Unit will cutoff if conveyor fails to index within a predetermined period of time