Coating Premix Tank

The premix tank will be located outside of the robot’s enclosure to provide normal operation, without interruption, during the operator’s loading of the premix tank. When required, the operator selects the desired coating tank, initiates and stops pumping the premix solution to the coating tank. This allows the operator to maintain control of the mixture level in the coating tanks.

The premix tank will be located outside of the robot’s enclosure to provide normal operation, without interruption, during the operator’s loading of the premix tank. When required, the operator selects the desired coating tank, initiates and stops pumping the premix solution to the coating tank. This allows the operator to maintain control of the mixture level in the coating tanks.

Dip Tank Refill System
• Diaphragm pump to pump premixed coating to either dip tank
• Noncorrosive and non-air entrapment features to maintain coating consistency control
• Valving and piping to feed coating to both dip tanks and allows draining and cleaning the system
• Operator controls to select dip tank and initiate refill or “topping up” to maintain level

Capacity

35.2 ft3 (1 m3)

Inside Diameter

44 in (1,118 mm)

Outside Diameter

50 in (1,270 mm)

Inside Depth

40 in (1,016 mm)

Overall Height

48 in (1,219 mm)

Heating

4.0 kW

  • Stainless steel interior vessel
  • Water jacket with submersible heating elements
  • Control panel with heating element contractors
  • Internal vortex baffles
  • Temperature and water level gauge mounted on side of tank
  • Adjustable speed, gear driven, electric mixer with high efficiency stainless steel impeller
  • Energy efficient electric motor specifically designed for mixer service
  • High torque, quiet, single reduction gearbox
  • Drain port in dished bottom for easy clean out
  • Infinitely variable solid state speed control containing feedback monitoring circuits that accurately maintain motor speed at the rate set, despite changes in loading. Motor speed is accurately set by single adjusting dial. Speed can be preset or adjusted at any time, whether mixer is running or not.